2125 Particulate Filter Common Applications/Hazards: For protection against certain particles, dusts, mists and fumes such as sanding, grinding, cutting, drilling metal, masonry, wood and concrete Protection Factors: Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to…
Show Full Product Description ✛

2125 Particulate Filter
Common Applications/Hazards:
- For protection against certain particles, dusts, mists and fumes such as sanding, grinding, cutting, drilling metal, masonry, wood and concrete
Protection Factors:
- Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.
This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
- With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
- With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 50 x WES
- Made from 3M high performance filter media for effective filtration efficiency
- Lightweight and provides low breathing resistance
- Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
- Common Applications/Hazards: For protection against certain particles, dusts, mists and fumes such as sanding, grinding, cutting, drilling metal, masonry, wood and concrete

6038 Toxic particulates P2/P3 (Asbestos)
Provides protection against:
- Particulates (P2/P3*). The protective casing helps deflect sparks and splashes of liquid. The casing also assists in environments where decontamination is required.
* Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator.
Common Applications/Hazards:
- For protection against certain particles, dusts, mists and fumes such as sanding, grinding, cutting, drilling metal, masonry, wood and concrete
- Carrying out lead or mould remediation - Also for certain asbestos tasks (refer to local Government guidelines***)
- Ideal if requiring a protective casing to deflect sparks, splashes or to wipe down
Protection Factors:
- Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant IDLH levels.
This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
- With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
- With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 100 x WES
- Solid top design reduces the chance of premature caking, clogging, or soiling with dirt, grime, water or dust
- Protective casing aids decontamination practices
- Temperature resistant cover protects filter media from heat, sparks or physical damage
- Patented bonded web technology has more surface area than many standard filters which helps lower breathing resistance making it more comfortable to use
- 3M™ Bayonet Connection System ensures precise and secure locking
- Low profile and well balanced twin filter design
- Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
Suggested Applications:
- Common Applications/Hazards: - For protection against certain particles, dusts, mists and fumes such as sanding, grinding, cutting, drilling metal, masonry, wood and concrete - Carrying out lead or mould remediation - Also for certain asbestos tasks (refer to local Government guidelines***) - Ideal if requiring a protective casing to deflect sparks, splashes or to wipe down

3M™ Particulate Filter 2128, GP2, with Nuisance Level Organic Vapour/Acid Gas Relief
Provides protection against: Particulates (P2), Ozone and Nuisance Level* Acid Gas and Organic Vapours with Low Vapour Pressure.Common Applications/Hazards:
For protection against welding fume, ozone, polishing and grinding particles. Also for spraying pesticides or herbicides with vapour pressure <1.3 Pa @ 25°C
Protection Factors:
- Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.
This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
- With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
- With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 50 x WES
- Organic compounds with low vapour pressures (<1.3Pa @ 25 degrees Celsius) in concentrations up to 10 x WES
- Ozone up to 10 x WES
- Offers relief from acid gases and organic vapours at levels below the WES
*Nuisance Levels are those levels below the Workplace Exposure Standard (WES).
- Made from 3M high performance filter media for effective filtration efficiency
- Lightweight and provides low breathing resistance
- Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
Suggested Applications:
- Common Applications/Hazards: For protection against welding fume, ozone, polishing and grinding particles. Also for spraying pesticides or herbicides with vapour pressure <1.3 Pa @ 25°C

3M™ Particulate Filter 2135, P2/P3
Provides protection against: Particulates (P2/P3*).
* Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator.
Common Applications/Hazards:
- For protection against toxic particles such as asbestos (refer to local government guidelines). Also for mould remediation and Beryllium
Protection Factors:
- Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.
This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
- With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
- With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 100 x WES
- Made from 3M high performance filter media for effective filtration efficiency
- Lightweight and provides low breathing resistance
- 3M™ Bayonet Connection System ensures precise and secure locking
- Low profile and well balanced twin filter design
- Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
Suggested Applications:
- Common Applications/Hazards: For protection against toxic particles such as asbestos (refer to local government guidelines). Also for mould remediation and Beryllium

3M ™ Filters for Dust 5925
Provides protection against:
- Particulates (P2), including those containing oil.
Common Applications/Hazards:
- For protection against certain particles, dusts, mists and fumes such as sanding, grinding, cutting, drilling metal, masonry, wood, concrete and mist droplets from spraying
Protection Factors:
- Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.
This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
- With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
- With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 50 x WES
- To be fitted with the 3M 6000 Series Cartridges and the 3M 501 Retainer

501 Filter retainer - Used to hold 3M™ Particulate Filters 5925 and 5935 in place on top of 3M™ Cartridges 6000 Series.
For more information on Particulate Filters, please click HERE to see the 3M brochure.