Pallet Wrap

Showing all 3 results

    Galewrap - Pre-stretched Pallet wrap

    • GaleWrap provides an easy to apply alternative to traditional films particularly for hand wrapping applications. It is easy to apply as it does not need to be stretched by the operator thus reducing manual handling during pallet wrapping applications. As a pre-stretched film, GaleWrap provides considerable cost and waste reduction benefits as less film is required to effectively wrap and secure the load.
    • GaleWrap has post wrap contraction so it will continue to contract around the load even after the load is wrapped
    • GaleWrap is cheaper on either a cost per roll, cost be square foot or cost per load basis
    • GaleWrap can wrap pallets with fewer revolutions which increases customer pallet wrapping efficiency because the rolls are pre-stretched to their maximum yields
    • GaleWrap pre-stretched pallet wrapping film is easy to use and wraps pallets tighter and faster
    • GaleWrap rolls are very lightweight decreasing OH&S risks and associated back injuries
    • GaleWrap has hemmed edges that guarantee that the entire roll will be used
    • GaleWrap has puncture resistance and if it is punctured it will not propagate or zipper 

    Pallet Tops

    • A polythene cover for your pallets to ensure they stay dry in transit.
    • Available in 3 sizes
    • 1. 1600mm x 1600mm
    • 2. 1680mm x 1680mm
    • 3. 2000mm x 2000mm


    We stock blown and cast pallet wrap - hand wrapping and machine wrap.

    Stretch film comes in varying thicknesses, colors and can be used in numerous applications. The main variable and starting point for stretch films is blown versus cast.

    • Blown stretch wrap, is created by blowing heated resin out vertically into a bubble. The bubble is then transformed into rolls while it is cooled by the surrounding air.
    • Cast stretch wrap is created by feeding a sheet of heated resin along with a rolling path with chilled rollers. The cooling solidifies the film, and it is made into large rolls.
    • Blown film is tougher and has less of a chance to puncture than cast. This occurs due to the slower cooling process, which allows the molecules in blown film to spread out as opposed to aligning in long lines like in cast. Blown film also has a higher level of cling than cast, making it stick to itself easier.
    • Cast stretch wrap has a clear, glossy finish allowing RFID and other scanning technology to be used with it while blown is hazy and dull. Cast stretch film unwinds much quieter than blown. It is also easier to stretch and control the gauge with cast film.
    • Blown film is recommended for wrapping loads with sharper edges, machinery, parts, bricks etc.
    • Cast film is recommended for wrapping lighter loads.

      PAKWRAP 500 x 375m 20mu is the most common wrap we sell - 98% of the time this is the one.