Surface Protection Film


Showing all 5 results


    6031 Surface Protection Film

    6031 Surface Protection Film – Clear 50 Microns thick

      Temporary PE Protection Film coated with a medium acrylic adhesion level.

    • A good balance of adhesion to surface contact on most surface types, especially suited to painted steel & powder coated steel.
    • Designed to remove cleanly from these surfaces with an exterior life of between 3 to 6 months (testing for surface – adhesive compatibility recommended).

    Carrier Graphic clear

    CARRIER – CLEAR POLYETHYLENE FILM
    ADHESIVE – SOLVENT FREE ACRYLIC

    THICKNESS TOTAL: 50 MICRONS
    ADHESION LEVEL: MEDIUM


    6035 Surface Protection Film

    6035 Surface Protection Film – Green 50 Microns thick

      Temporary PE Protection Film coated with a medium acrylic adhesion level.

    • The medium adhesion level is suitable for various surface areas where good initial adhesion and clean removal is required, such as glass, laminates & painted metals. (Testing for surface – adhesive compatibility recommended).
    • The vibrant green tinted film is excellent for exterior use & identification especially on large construction sites.

    Carrier Graphic green

    CARRIER – GREEN POLYETHYLENE FILM ADHESIVE – SOLVENT FREE ACRYLIC

    THICKNESS TOTAL: 50 MICRONS
    ADHESION LEVEL:  MEDIUM


    6091 Surface Protection Film

    6091 Surface Protection Film – Black White 100 Microns thick

     Temporary PE Protection Film coated with a medium acrylic adhesion level.
    • The medium adhesion level is suitable for various surface areas where good initial adhesion and clean removal is required, such as stainless steel, powder coated metals, aluminum. (Testing for surface – adhesive compatibility recommended).
    • The extra tough black / white film is excellent for exterior use, identification & heavy-duty applications.

    Carrier Graphic black white 2

     
    CARRIER – BLACK / WHITE POLYETHYLENE FILM
    ADHESIVE – SOLVENT FREE ACRYLIC
    THICKNESS TOTAL: 100 MICRONS
    ADHESION LEVEL:  MEDIUM


    6913 Surface Protection Film

    6913 Surface Protection Film – Black 100 Microns thick

     Temporary LDPE Protection Film coated with a medium rubber adhesion level.
    • The transparent rubber adhesive designed for temporary indoor / outdoor masking of aluminum window profiles during general construction, paint spray work & plastering. (Testing for surface – adhesive compatibility recommended).
    • The tough low stretch LDPE film is excellent for exterior use, identification & is designed to remove cleanly after use.

     
    Carrier Graphic black

    CARRIER – BLACK LDPE FILM ADHESIVE – RUBBER
    THICKNESS TOTAL: 100 MICRONS
    ADHESION LEVEL:  MEDIUM

    Please enquire about custom slit widths.


    Carpet Protection Film

    REVERSE WOUND FOR QUICK EFFICIENT APPLICATION

    • The pattern coating allows for an easy release off the roll and it can be applied by one person.
    • The pattern coating allows for pull up during initial application if the  film needs to be repositioned. Example: Around pillars or if cutting is required around door and entrance areas.
    • The pattern coating system reduces the problems of air bubbles & film wrinkling on application because the film / adhesive releases off the roll cleanly. Also if the film sticks to itself the adhesive is designed to pull apart without problem.
    • The rolls are reverse wound for ease of application.
    • The film is designed to be tear and puncture resistant.

    Sizes:
    500mm x 100m
    1000 mm x 100m